Easy Setup

In [Easy Setup], you can change the settings of date/time, fax, network, e-mail function by using (SETTING).

  1. Press (SETTING).

  2. Select [Easy Setup], and then press (OK).

  3. Enter the administrator password.

    The factory default password is "aaaaaa".

  4. Select [Enter], and then press (OK).

  5. Change the setting, and then press (OK) until a message is displayed to inform you that the setting is complete.

  6. Press (OK) to complete the setup.

Item

Description

Date/Time Setting

Time Zone

Sets the GMT time zone.

Daylight Saving

Sets daylight saving to ON or OFF.

Server

SNTP Server (Primary)

Sets the SNTP server to use for setting the current date and time. You can enter up to 64 characters.

SNTP Server (Secondary)

Manual

Date

Sets the current date and time manually.

Time

Fax Setting

Fax Number

Sets the fax number of this machine. You can enter up to 40 digits.

Sender ID

Sets the sender's information. You can enter up to 22 characters.

Network Setting

IP Address

Sets the IP address. You can enter up to 15 characters.

Subnet Mask

Sets the subnet mask. You can enter up to 15 characters.

Default Gateway

Sets the gateway address. You can enter up to 15 characters.

DNS Server (Primary)

Sets the IP address for a Primary DNS server. You can enter up to 15 characters.

DNS Server (Secondary)

Sets the IP address for a Secondary DNS server. You can enter up to 15 characters.

WINS Server (Primary)

Sets the name or the IP address for the WINS server. You can enter up to 15 characters.

WINS Server (Secondary)

Sets the name or the IP address for the WINS server. You can enter up to 15 characters.

E-mail Setting

Mail Server Address

Sets the IP address or host name for the SMTP server. You can enter up to 64 characters.

Set Sender's Address (from)

Sets an e-mail address for this machine.

Receive Setting

Sets the protocol to be used for receiving e-mails.

Authentication Method

Sets the authentication method.

SMTP User ID

Sets the login ID to the server used for SMTP authentication. You can enter up to 64 characters.

SMTP Password

Sets the password to the server used for SMTP authentication. You can enter up to 64 characters.

POP3 Server

Sets the IP address or host name for the POP3 server. You can enter up to 64 characters.

POP User ID

Sets the login ID to the server used for POP authentication. You can enter up to 64 characters.

POP Password

Sets the password to the server used for POP authentication. You can enter up to 16 characters.