Network Menu
Set the basic settings and other network settings.
-
Press
(SETTING). -
Select [Admin Setup], and then press
(OK). -
Enter the administrator password.
The factory default password is "aaaaaa".
-
Select [Enter], and then press
(OK). -
Press
to select [Network Menu], and then press (OK).
-
Change the setting, and then press
(OK). -
Press
until the top screen is displayed.
|
Item |
Factory default setting |
Description |
|||||
|---|---|---|---|---|---|---|---|
|
Network Setup |
Network Setting |
TCP/IP |
Enable |
Sets whether to enable TCP/IP. |
|||
|
NetBIOS over TCP |
Enable |
Sets whether to enable NetBIOS over TCP/IP. Display condition: TCP/IP protocol is enabled. |
|||||
|
IP Address Set |
Auto |
Sets the method of assigning an IP address. |
|||||
|
IPv4 Address |
192.168.100.100 |
Sets an IP address. Display condition: TCP/IP protocol is enabled. |
|||||
|
Subnet Mask |
255.255.255.0 |
Sets a subnet mask. Display condition: TCP/IP protocol is enabled. |
|||||
|
Gateway Address |
0.0.0.0 |
Sets a gateway address. Display condition: TCP/IP protocol is enabled and the IP version is not set to IPv6. |
|||||
|
DNS Server (Primary) |
0.0.0.0 |
Sets the IP address for a Primary DNS server. Display condition: TCP/IP protocol is enabled. |
|||||
|
DNS Server (Secondary) |
0.0.0.0 |
Sets the IP address for a Secondary DNS server. Display condition: TCP/IP protocol is enabled. |
|||||
|
WINS Server (Primary) |
0.0.0.0 |
Sets the name or the IP address for the WINS server. Display condition: TCP/IP protocol is enabled. |
|||||
|
WINS Server (Secondary) |
0.0.0.0 |
Sets the name or the IP address for the WINS server. Display condition: TCP/IP protocol is enabled. |
|||||
|
Proxy |
Disable |
Sets whether to use proxy. |
|||||
|
Proxy Server |
(NULL) |
Sets the name or IP address of the proxy server. You can enter up to 15 characters. |
|||||
|
Proxy Server Port No. |
8080 |
Sets the port number of the proxy server. |
|||||
|
Proxy User ID |
(NULL) |
Sets the user ID to connect to the proxy server. |
|||||
|
Proxy Password |
(NULL) |
Sets the password to connect to the proxy server. |
|||||
|
Web |
Enable |
Sets whether to enable access from a Web browser. Display condition: TCP/IP protocol is enabled. |
|||||
|
Telnet |
Disable |
Sets whether to enable access from the Telnet. Display condition: TCP/IP protocol is enabled. |
|||||
|
FTP |
Disable |
Sets whether to enable access with FTP. Display condition: TCP/IP protocol is enabled. |
|||||
|
IPSec |
Disable |
This item is displayed only if IPSec is set to valid. This item can be changed to disable only. |
|||||
|
SNMP |
Enable |
Sets whether to enable access from SNMP. Display condition: TCP/IP is enabled. |
|||||
|
Network Scale |
Normal |
[Normal]: The machine operates effectively even if connected to a HUB with the spanning tree function. However, the machine takes longer to start up if it is connected to a small LAN that consists of two or three computers. [Small]: This setting covers a small LAN that consists of two or three computers to a large LAN, but the machine may not operate efficiently if it is connected to a HUB with the spanning tree function. |
|||||
|
Gigabit Network |
Disable |
Sets whether to enable access with Gigabit Ethernet. |
|||||
|
HUB Link Setting |
Auto Negotiate |
Sets the hub linking method. Normally, select [Auto Negotiate]. |
|||||
|
Wireless Setting |
Automatic Setup (WPS) |
WPS-PBC |
- |
WPS-PBC is executed. |
|||
|
WPS-PIN |
- |
WPS-PIN is executed. |
|||||
|
Wireless Network Selection |
A list of access point name found in the search |
- |
Displays a list of wireless LAN access points' names that are found in a search. |
||||
|
Manual Setup |
SSID |
(NULL) |
Enter an SSID. |
||||
|
Security |
Disable |
Selects the security of the wireless LAN function. "WPA2-EAP" can set only in Web. |
|||||
|
WPA Encryption Type |
AES |
Select a WPA2-PSK encryption type. Displays if [WPA2-PSK] is selected for [Security]. |
|||||
|
WPA Pre-shared Key |
(NULL) |
Enter the Pre-shared Key. Displays if [WPA2-PSK] is selected for [Security]. |
|||||
|
Wireless reconnection |
- |
Wireless reconnection is executed. |
|||||
|
Enabling Wired Communications |
- |
Switch wireless network connection to wired network connection. This item is displayed if wireless communications are enabled. |
|||||
|
Factory Defaults |
Execute |
The settings of the network, mail server, LDAP server, and secure protocol server are returned to the default settings. |
|||||
|
Mail Server Setup |
SMTP Server |
(NULL) |
Sets the IP address or server name for the SMTP server. |
||||
|
SMTP Port |
25 |
Sets the port number for the SMTP server. Normally, use the default setting. Available range: 1 to 65535 |
|||||
|
SMTP Encryption |
None |
Selects an encryption method in the SMTP communication. |
|||||
|
Receive Setting |
Disable |
Sets the protocol to be used for receiving e-mails. |
|||||
|
POP3 Server |
(NULL) |
Sets the IP address or server name for the POP3 server. |
|||||
|
POP3 Port |
110 |
Sets the port number prepared by POP3 on the POP3 server. Available range: 1 to 65535 |
|||||
|
POP Encryption |
None |
Selects an encryption method in the POP communication. |
|||||
|
Authentication Method |
None |
Selects an authentication method for e-mail transmissions. |
|||||
|
SMTP User ID |
(NULL) |
Sets the login name to the server used for SMTP authentication. |
|||||
|
SMTP Password |
(NULL) |
Sets a login password to the server used for SMTP authentication. |
|||||
|
POP User ID |
(NULL) |
Sets a login name to the server used for POP certification or for printing received e-mail attachment files. |
|||||
|
POP Password |
(NULL) |
Sets a login password to the server used for POP certification or for printing received e-mail attachment files. |
|||||
|
LDAP Server Setting |
Server Setting |
LDAP Server |
(NULL) |
Sets the IP address or server name for the LDAP server. |
|||
|
Port No. |
389 |
Sets the port number for the LDAP server. Available range: 1 to 65535 |
|||||
|
Timeout |
30 second(s) |
Sets the timeout value for the search response from the LDAP server. Available range: 10 to 120 seconds |
|||||
|
Max. Entries |
100 Entries |
Sets the maximum number of search results from the LDAP server. |
|||||
|
Search Root |
(NULL) |
Specifies a position to start searching the LDAP directory. |
|||||
|
Attribute |
Name1 |
cn Specifies an attribute used for searching. sn givenName (NULL) |
|||||
|
Name2 |
|||||||
|
Name3 |
|||||||
|
E-mail Address |
|||||||
|
Additional Filter |
|||||||
|
Authentication |
Method |
Anonymous |
Sets the authentication method. For Digest-MD5, the DNS server must be set. For Secure Protocol, the secure protocol server must be set. |
||||
|
User ID |
(NULL) |
Sets a user ID for LDAP server authentication. You can enter up to 80 characters. Display condition: the LDAP authentication method is not set to [Anonymous]. |
|||||
|
Password |
(NULL) |
Sets a password for LDAP server authentication. You can enter up to 32 characters. Display condition: the LDAP authentication method is not set to [Anonymous]. |
|||||
|
Encryption |
None |
Sets the encryption of communication to the LDAP server. |
|||||
|
Secure Protocol Server Setting |
Domain |
(NULL) |
Sets a realm name for the Kelberos certification. You can enter up to 64 characters. |
||||
Memo
To apply the settings that are changed on the [Network Menu] menu, you must restart a network card. Restart the network card according to a confirmation screen that is displayed when you change settings.