Setting a Tray to Print Received Documents
A received fax is automatically printed. You can specify a paper tray to use.
Note
Do not pull the paper tray out during printing.
If the machine cannot print received faxes due to a lack of paper or paper jams, the machine can receive data of up to 200 sheets. (However, this amount varies depending on the remaining memory space or document content.) If the machine cannot print received faxes due to a lack of paper or paper jams, refer to the following pages to solve a problem. If the problem is solved, printing starts automatically.
-
Press
(SETTING). -
Press
to select [Paper Setup], and then press 
(OK).
-
Press
to select [Select Tray], and then press (OK).
-
Check that [Fax] is selected, and then press
(OK). -
Press
to select a paper tray, and then press (OK).
-
Press
to select an item, and then press (OK).
Available setting values
ON*,
OFF,ON(Prior)* indicates the factory default setting.
-
The paper tray with [ON(Prior)] set is used ahead of another tray that holds paper of the same size.
-
The MP tray is set to [OFF] by factory default.
-
-
Press
until the top screen is displayed.
Memo
-
Use only plain or recycled paper.
-
Available paper sizes are A4, Letter, Legal 13/13.5/14.
-
If a received fax is larger than a specified paper size, the fax is reduced, discarded, or printed onto multiple sheets of paper depending on the reception print settings.
Setting a Print Method for When a Received Image Exceeds Paper Size